BLQRL - 16402 MULTIPURPOSE COVE BASE ADHESIVE (MD 982)

  • MSDS: BLQRL
  • Manufacturer: MACKLANBURG DUNCAN
  • Product Name: 16402 MULTIPURPOSE COVE BASE ADHESIVE (MD 982)
  • National Stock Number: 8040-00F019652
Product Identification

Product ID:16402 MULTIPURPOSE COVE BASE ADHESIVE (MD 982)
MSDS Date:01/17/1991
FSC:8040
NIIN:00F019652
MSDS Number: BLQRL

Responsible Party
MACKLANBURG-DUNCAN
4041 NORTH SANTA FE
OKLAHOMA CITY, OK 73118

Emergency Phone: (405) 528-4411

Info Phone: (405) 528-4411

Cage: 82464

Contractor
MACKLANBURG-DUNCAN
OKLAHOMA CITY, OK 73118-0188 US

Telephone: 800-654-8454 / 405-528-4411

Cage: 82464

Ingredients

ALCOHOL MIXTURE

Fraction By Weight: <8%

ACGIH TLV: 400 PPM


MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

CAS: 64742-88-7

Fraction By Weight: <2%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


METHYL ALCOHOL (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: <10%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


231 G/L

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, HEADACHE, OR
UNCONSCIOUSNESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, HEADACHE, OR
UNCONSCIOUSNESS.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/WATER. EYES:
FLUSH W/WATER FOR 15 MINS. INGESTION: DON'T INDUCE VOMITING. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:40F
Lower Limits:6.7%
Upper Limits:36%
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS IN
POSITIVE PRESSURE MODE & FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:IRRITATING OR TOXIC GASES & AEROSOLS MAY
BE PRODUCED DURING BURNING. CLOSED CONTAINERS MAY BUILD UP PRESSURE
& EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:SCRAPE INTO CONTAINERS.

Handling

Handling and Storage Precautions:DON'T STORE NEAR HEAT SOURCES, SPARKS,
OR FLAME. STORE BETWEEN 40-120F. DON'T FREEZE. AVOID CONTACT
W/ALUMINUM. USE ONLY IN WELL VENTILATED AREAS.
Other Precautions:DON'T INGEST OR SMOKE NEAR STORED MATERIAL. KEEP AWAY
FROM CHILDREN.

Exposure Controls

Respiratory Protection:AS REQUIRED
Ventilation:ADEQUATE TO KEEP VAPORS Protective Gloves:AS REQUIRED
Eye Protection:RECOMMENDED
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:180F
Vapor Density:44
Spec Gravity:1.44
Evaporation Rate & Reference:(ETHER = 1): 7.1
Solubility in Water:INSOLUBLE
Appearance and Odor:BROWN MASTIC W/SLIGHTLY SWEET ROSIN ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIS, OXIDIZING MATERIALS, & ALUMINUM.
Stability Condition to Avoid:OPEN FLAMES, HOT SURFACES, SPARKS,
TEMPERATURES <40F OR >120F, FREEZING, HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:CO, CO2, OR UNKNOWN ORGANICS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS IN A SANITARY LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.